Enclosures made of fire-resistant plastic resin, class E2, according to ISO EN 11925-2: 2010, in areas near engine and electrical components.
Housing incorporating a sound-absorbing coating, optimized to minimize sound emissions emitted into the environment and transmitted through the exhaust and supply ducts.
Nominal diameter 100 mm.
EC (brushless) motor, thermally protected, with shaft mounted on bearing supports, combined with centrifugal impeller.
High water resistance: IPX5 (if installed in a duct).
Equipped with thermal safety overheat safety device.
Adjustable speed via potentiometer (0-10V signal) or two-speed switch (to be set at the installation in a predetermined range).
TECHNICAL DATA AND PERFORMANCE DATA
Frequency (Hz) 50-60
Insulation class II° IP 45
Maximum ambient temperature for continuous operation (°C) 60
Maximum. absorbed current at 10V (A) 0.26
Maximum. absorbed current at 4V (A) 0.09
Maximum. absorbed current at 6V (A) 0.12
Maximum. absorbed current at 8V (A) 0.18
Maximum. absorbed power at 10 V (W) 23
Maximum. absorbed power at 4V (W) 6.2
Maximum. absorbed power at 6V (W) 8.3
Maximum. absorbed power at 8V (W) 14.7
Nominal diameter (mm) 100
Voltage (V) 220-240
Weight (Kg) 3.8
Maximum delivery at 10 V (l/s) 83.3
Maximum delivery at 10 V (m³/h) 300
Maximum delivery at 4 V (l/s) 37.5
Maximum delivery at 4 V (m³/h) 135
Maximum delivery at 6 V (l/s) 48.6
Maximum delivery at 6 V (m³/h) 175
Maximum delivery at 8 V (l/s) 69.4
Sound pressure on the exhaust side at 3m at 10V Lp 38.1[dB (A)]
Sound pressure on the exhaust side at 3m at 4V Lp 20.2[dB (A)]
Sound pressure on the exhaust side at 3m at 6V Lp 25,4[dB (A)]
Sound pressure on the exhaust side at 3m at 8V Lp 35,9[dB (A)]
Sound pressure on the supply side at 3m at 10V Lp 40.7[dB (A)]
Sound pressure on the supply side at 3m at 4V Lp 20.6[dB (A)]
Sound pressure on the supply side at 3m at 6V Lp 26.1[dB (A)]
Sound pressure on the supply side at 3m at 8V Lp 36,7[dB (A)]
Ελληνικά
IMQ 
CE 
UKCA