SKU: VRT-17147 Category:

LINEO 160

  • Enclosures made of fire-resistant plastic resin, class E2, according to ISO EN 11925-2: 2010, in areas near engine and electrical components.
  • Nominal diameter 160 mm.
  • Induction motor, thermally protected, with shaft mounted on bearing supports, combined with centrifugal impeller.
  • High water resistance: IPX5 (if installed in a duct).
  • Adjustable speed via Vortice speed devices.

TECHNICAL DATA AND PERFORMANCE DATA

  • Absorbed power 1st gear (W)40
  • Frequency (Hz)50
  • Insulation classII°
  • IP44
  • Maximum ambient temperature for continuous operation (°C)60
  • Maximum. absorbed Current at max. speed (A)0.26
  • Maximum. absorbed Current in min. speed (A)0.18
  • Maximum. absorbed power at maximum speed (W)58
  • Nominal diameter (mm)160
  • Voltage (V)220-240
  • Weight (Kg) 2.8
  • Delivery 1st gear (l/s)106.9
  • Delivery 1st gear (m³/h)385
  • Maximum delivery at maximum speed (l/s)152.8
  • Maximum delivery at maximum speed (m³/h)550
  • Pressure – 1st gear (mmH20)21
  • Pressure – 1st gear (Pa)206
  • Maximum pressure – maximum speed (mmH20)27
  • Maximum pressure – maximum speed (Pa)264.9
  • RPM max 2100
  • min1580
  • Sound pressure level Lp ​​ [wpcodeself] ​​ 3m – max speed 50.8[dB (A)]
  • Sound pressure level Lp 3m – min speed41.7[dB (A)]

Technical Data Sheet

DIMENSIONS

  • Size A (mm)214.5
  • Size B (mm) 234
  • Size C (mm) 272.5
  • Size D (mm)156
  • Size E (mm) 112.5
  • Size F (mm)212
  • Size G (mm)110
  • Size H (mm)60
  • Size L (mm) 80
  • Size M (mm)5.5

CERTIFICATES

Curves

Curva_JPG_17147-Curve_per_Catalogo