Enclosures made of fire-resistant plastic resin, class E2, according to ISO EN 11925-2: 2010, in areas near engine components and electrical components.
Nominal diameter 125 mm.
Induction motor, thermally protected, with shaft mounted on bearing supports, combined with centrifugal impeller.
Equipped with an electronic timer for automatic operation at maximum speed, which can be set in the range 3-20′ during installation (default setting 3′).
High water resistance: IPX5 (if installed in a duct).
Adjustable speed via Vortice speed devices.
TECHNICAL DATA AND PERFORMANCE DATA
Frequency (Hz) 50
Insulation class II°
IP44
Maximum absorbed current at maximum speed (A) 0.15
Maximum absorbed current at minimum speed (A) 0.11
Maximum absorbed power at maximum speed (W) 33
Maximum ambient temperature for continuous operation (°C) 60
Nominal diameter (mm) 125
Power absorbed in 1st gear (W) 25
Voltage (V) 220-240
Weight (Kg) 1.8
Air flow in 1st gear (l/s) 69.4
Air flow in 1st gear (m³/h) 250
Maximum airflow at maximum speed (l/s) 101.4
Maximum airflow at maximum speed (m³/h) 365
Maximum pressure at maximum speed (mmH20) 17
Maximum pressure at maximum speed (Pa) 166.8
Maximum revolutions per minute 2140
Minimum revolutions per minute 1570
Pressure in 1st gear (mmH20) 13
Pressure in 1st gear (Pa) 127.5
Ηχητική πίεση στα 3 m – ελάχιστη ταχύτητα Lp [wpcodeself] 3m – ελάχιστη ταχύτητα 33.9[dB (A)]
Sound pressure at 3m at maximum speed Lp 43[dB (A)]
Ελληνικά
CE 
G-Mark 
UKCA