LINEO 125
SKU: VRT-17145 Category:

LINEO 125

  • Enclosures made of fire-resistant plastic resin, class E2, according to ISO EN 11925-2: 2010, in areas near engine and electrical components.
  • Nominal diameter 125 mm.
  • Induction motor, thermally protected, with shaft mounted on bearing supports, combined with centrifugal impeller.
  • High water resistance: IPX5 (if installed in a duct).
  • Adjustable speed via Vortice speed devices.

TECHNICAL DATA AND PERFORMANCE DATA

  • Absorbed power 1st gear (W)25
  • Frequency (Hz)50
  • Insulation classII°
  • IP44
  • Maximum ambient temperature for continuous operation (°C)60
  • Maximum. absorbed Current at max. speed (A)0.15
  • Maximum. absorbed Current in min. speed (A)0.11
  • Maximum. absorbed power at maximum speed (W)33
  • Nominal diameter (mm)125
  • Voltage (V)220-240
  • Weight (Kg) 1.8
  • Delivery 1st gear (l/s)69.4
  • Delivery 1st gear (m³/h)250
  • Maximum delivery at maximum speed (l/s)101.4
  • Maximum delivery at maximum speed (m³/h)365
  • Pressure – 1st gear (mmH20)13
  • Pressure – 1st gear (Pa)127.5
  • Maximum pressure – maximum speed (mmH20)17
  • Maximum pressure – maximum speed (Pa)166.8
  • RPM max 2140
  • min1570
  • Sound pressure level Lp 3m – maximum speed43[dB (A)]
  • Sound pressure level Lp 3m – min speed33,9[dB (A)]

Technical Data Sheet

DIMENSIONS

  • Size A (mm)188.5
  • Size B (mm) 211
  • Size C (mm)258
  • Size D (mm)122
  • Size E (mm) 101.5
  • Size F (mm)189
  • Size G (mm)90
  • Size H (mm)60
  • Size L (mm) 80
  • Size M (mm)5.5

CERTIFICATES

Curves

Curva_JPG_17145-Curve_per_Catalogo