- Enclosures made of fire-resistant plastic resin, class E2, according to ISO EN 11925-2: 2010, in areas near engine and electrical components.
- Nominal diameter 100 mm.
- Induction motor, thermally protected, with shaft mounted on bearing supports, combined with centrifugal impeller.
- Equipped with an electronic timer for automatic operation at maximum speed, which can be set in the range 3-20′ during installation (default setting 3′).
- High water resistance: IPX5 (if installed in a duct).
- Adjustable speed via Vortice speed devices.
TECHNICAL DATA AND PERFORMANCE DATA
- Absorbed power 1st gear (W)20
- Frequency (Hz)50
- Insulation classII°
- IP44
- Maximum ambient temperature for continuous operation (°C)60
- Maximum. absorbed Current at max. speed (A)0.11
- Maximum. absorbed Current in min. speed (A)0.09
- Maximum. absorbed power at maximum speed (W)23
- Nominal diameter (mm)100
- Voltage (V)220-240
- Weight (Kg)2
- Delivery 1st gear (l/s)50
- Delivery 1st gear (m³/h)180
- Maximum delivery at maximum speed (l/s)70.8
- Maximum delivery at maximum speed (m³/h)255
- Pressure – 1st gear (mmH20)13
- Pressure – 1st gear (Pa)127.5
- Max pressure – max speed (mmH20)16.5
- Maximum pressure – maximum speed (Pa)161.9
- RPM max2030
- min1520
- Sound pressure level Lp 3m – maximum speed39,4[dB (A)]
- Sound pressure level Lp 3m – min speed30,7[dB (A)]
DIMENSIONS
- Size A (mm)188.5
- Size B (mm) 211
- Size C (mm)303
- Size D (mm)96
- Size E (mm) 101.5
- Size F (mm)189
- Size G (mm)90
- Size H (mm)60
- Size L (mm) 80
- Size M (mm)5.5
CERTIFICATES
CE
G-Mark
UKCA