SKU: VRT-17190 Category:

LINEO 100 T QUIET

  • Enclosures made of fire-resistant plastic resin, class E2, according to ISO EN 11925-2: 2010, in areas near engine and electrical components.
  • Housing incorporating a sound-absorbing coating, optimized to minimize sound emissions emitted into the environment and transmitted through the exhaust and supply ducts.
  • Nominal diameter 100 mm.
  • Induction motor, thermally protected, with shaft mounted on bearing supports, combined with centrifugal impeller.
  • Equipped with an electronic timer for automatic operation at maximum speed, which can be set in the range 3-20′ during installation (default setting 3′).
  • High water resistance: IPX5 (if installed in a duct).
  • Adjustable speed via Vortice speed devices.

TECHNICAL DATA AND PERFORMANCE DATA

  • Absorbed power 1st gear (W)11
  • Frequency (Hz)50-60
  • Insulation classII°
  • IP45
  • Maximum ambient temperature for continuous operation (°C)45
  • Maximum ambient temperature for continuous 60Hz operation (°C)45
  • Maximum. absorbed Current at max. speed (A)0.13
  • Maximum. absorbed Current in min. speed (A)0.09
  • Maximum. absorbed power at maximum speed (W)27
  • Nominal diameter (mm)100
  • Voltage (V)220-240
  • Weight (Kg) 3.8
  • Delivery 1st gear (l/s)41.7
  • Delivery 1st gear (m³/h)150
  • Maximum delivery at maximum speed (l/s)72.2
  • Maximum delivery at maximum speed (m³/h)260
  • Maximum pressure but min. 60 Hz (mmH2O)7,6
  • Maximum pressure but min. 60 Hz (Pa)74,5
  • Pressure – 1st gear (mmH20)9
  • Pressure – 1st gear (Pa)88.3
  • Maximum pressure – maximum speed (mmH20)15
  • Maximum pressure – maximum speed (Pa)147.1
  • RPM max 2260
  • RPM max up to 60 Hz2100
  • RPM med1880
  • RPM with 60Hz1795
  • min1455
  • RPM min a 60Hz1445
  • Maximum speed at 60 Hz (Rpm) 2100
  • Average speed at 60 Hz (Rpm) 1795
  • Minimum revolutions per minute 1455
  • Minimum speed at 60 Hz (Rpm) 1445
  • Sound power on the supply side with a minimum speed of LWA 40 [dB (A)]
  • Pressure in 1st gear (mmH20) 9
  • Pressure in 1st gear (Pa) 88.3
  • RPM at medium speed 1880
  • Sound power on the exhaust side at maximum speed LWA 52,8[dB (A)]
  • Output side sound power at average speed LWA ​​ ​​ 48.3[dB (A)]
  • Output side sound power at minimum speed LWA​​ 40.3[dB (A)]
  • Feed-side sound power at maximum speed LWA ​​ [dB (A)] ​​ 52.6
  • Sound power on the power supply side at medium speed LWA 47.8[dB (A)]
  • Sound pressure on the exhaust side at 3m at maximum speed Lp 35,3[dB (A)]
  • Exhaust side sound pressure at 3m at medium speed Lp 30.8[dB (A)]
  • Sou[dB (A)]nd pressure on the exhaust side at 3m at minimum speed Lp 22,8
  • Sound press[dB (A)]ure on the supply side at 3m at maximum speed Lp 35,1
  • Sound pressure on the feed side at 3m at medium speed Lp 30,3[dB (A)]
  • Sound pressure on the supply side at 3m at minimum speed Lp 22,5[dB (A)]

Technical Data Sheet

DIMENSIONS

  • Size A (mm)210
  • Size B (mm) 294.5
  • Size C (mm)639
  • Size D (mm) Ø 97
  • Size E (mm) 130
  • Size F (mm)235
  • Size G (mm)135
  • Size H (mm) 120
  • Size L (mm) 67.5
  • Size M (mm) Ø 5.5
  • Size N (mm)320

CERTIFICATES

Curves

Curva_JPG_17190-Curve_per_Catalogo