Ελληνικά
MBRU
MEDIUM PRESSURE WITH REAR IMPELLER
- Fan made of Fe360 sheet. The fan paint finish is based on Qualicoat polyester powder coating in an oven at 200ºC, with an average film thickness of 70 microns. The average thermal resistance of the coating is 180ºC with peaks of 200ºC.
- Fully welded or jointed casing.
- Single inlet rear impeller with self-cleaning system made of Fe360 sheet statically and dynamically balanced. The rotors are painted with a polyester primer that withstands temperatures up to 300ºC.
- Standard squirrel-cage asynchronous motor with IP-55 protection and class F insulation. Manufactured with standard voltages: 230/400V 50Hz for three-phase motors up to 4kW and 400/690V 50Hz for higher powers. IE4 motors for power of 75 kW or more.
- LG270 standard orientation.
- Allows local adjustment of orientation from models 250 to 630. Model sizes from 710 to 1400 sizes orientation is fixed.
APPLICATIONS
Designed for indoor installation, they are suitable for:
- Industrial applications, air extraction or injection.
- Engine and spare parts cooling.
- Transport of dusty air and small loads of pellet materials.
- Evaporation after filters, separators and cyclones.
- Spiritual transference.
- Maximum operating temperature: transported air: 130ºC, ambient 60ºC.
ON REQUEST
- Fans for 60Hz and special voltages.
- 2 speed motor.
- C4 or C5 coating paint
- Hot dip galvanized
- Special steel (Cor-Ten A, Hardox…)
- Inox 304 (normal or electropolished finish)
- Inox 316 (normal or electropolished finish)
- Cooling wheel
- Anti-caloric paint
- Reinforced housing
- Fully welded housing (waterproof)
- Insulated housing
- Split housing (for large sizes)
- Inspection door for easy maintenance and cleaning
- Drain plug.
- Air tight axle
- Front leg
- Double suction flange
- Available in non-sparking air passage and engine standard.
- Other engine brands.
- Orientation: RD0, RD45, RD90, RD135, RD180, RD225, RD270, RD315, LG0, LG45, LG90, LG135, LG180. LG225, LG315.