Ελληνικά
HIGH PRESSURE WITH REAR IMPELLER AND BELT DRIVE
- Fan made of Fe360 sheet. The fan paint finish is based on Qualicoat polyester powder coating in an oven at 200ºC, with an average film thickness of 70 microns. The average thermal resistance of the coating is 180ºC with peaks of 200ºC.
- Fully welded housing.
- Single high performance rear inlet impeller with self-cleaning system made of Fe360 sheet statically and dynamically balanced. The rotors are painted with a polyester primer that withstands temperatures up to 300ºC.
- Motorized fan with base frame (configuration 12). Fully equipped fans including: motor, pulleys, belts, belt guard and shaft guard. Mounted on top of a base plate. IE4 motors for power of 75 kW or more.
- LG270 standard orientation.
- Allows orientation to be localized from models 500 to 630. Model sizes from 710 to 1250 sizes orientation is fixed.
APPLICATIONS
Designed for indoor installation, they are suitable for:
- Industrial applications, air extraction or injection.
- Engine and spare parts cooling.
- Evaporation after filters, separators and cyclones.
- Spiritual transference.
- Clean Air Transport.
- Maximum operating temperature: transported air: 130ºC, ambient: 60ºC.
ON REQUEST
- Fans for 60Hz and special voltages.
- 2 speed motor.
- Fan with free shaft (configuration 1) or with motor supported on the side of the pedestal (configuration 9).
- C4 or C5 coating paint
- Hot dip galvanized
- Special steel (Cor-Ten A, Hardox…)
- Inox 304 (normal or electropolished finish)
- Inox 316 (normal or electropolished finish)
- Cooling wheel
- Anti-caloric paint
- Reinforced housing
- Fully welded housing (waterproof)
- Insulated housing
- Split housing (for large sizes)
- Inspection door for easy maintenance and cleaning
- Drain plug.
- Air tight axle
- Front leg
- Double suction flange
- Non-sparking air passage and standard engine.
- Other engine brands.
- Orientation: RD0, RD45, RD90, RD135, RD180, RD225, RD270, RD315, LG0, LG45, LG90, LG135, LG180. LG225, LG315.