CALDOMI

Front housing moulded in self-extruded ABS thermoplastic resin with V0 designation, white painted finish.
Rear housing molded from V0 rated self-extinguishing polypropylene, incorporating the air intake grill.
Air exhaust grille made of polypropylene, located on the front of the housing.
Shaded pole induction motor with shaft rotation in self-lubricating rings, combined with a centrifugal impeller made of glass fiber reinforced nylon.
Heating element with two preset output settings (1000 / 2000 W), protected by manually resettable thermal overload limiter.
Rotary switch with 3 positions: OFF/1000/2000 W
Manually adjustable room thermostat with antifreeze function that guarantees automatic activation of the heater whenever the ambient temperature drops below 5°C.
Power cable with Schuko euro cast plug.
Built-in winder with recoil cord.
Mounts vertically for floor or benchtop operation using the foot on the rear housing.

TECHNICAL DATA AND PERFORMANCE DATA

Maximum absorbed current (A) 8,7
Maximum absorbed power (W) 2000
Frequency (Hz) 50
Insulation class II°
ΙΡΧ1
Voltage (V) 230
Weight (Kg) 1.850
Pilot flame storage devices no
Luminaires with standby function no
Auxiliary power consumption at minimum heat output – elmin (kW) 0,03
Auxiliary power consumption at rated output power – elmax (kW) 0,03
Standby auxiliary power consumption – elSB (kW) 0,03
Rate limitation control in NO mode
One-distance control NO
Control with black globe thermometer NO
Control of ambient temperature for best possible operation NO
Ambient temperature control for presentation NO
Adaptive start-up control NO
Seasonal energy efficiency -? S (%) 36
Thermal power with two or more manual phases without room temperature control NO
Single-phase heat output without room temperature control NO
Thermal power with room temperature control with mechanical thermostat YES