Scroll and front panel made of self-extinguishing ABS, rated V0.
Motor housing and filter frame made of ABS plastic.
1 speed AC motor, shaft in bearings, connected to a centrifugal forward impeller, made of PBT.
Nominal air flow: 60 m3/h
G2 filter, with mechanical filter clogged alarm, fully compliant with ErP reg. N° 1253/2014/UE, in force since January 1, 2018.
EVO timer function: activation/deactivation of exhaust fan is done via light control. the built-in electronics allow you to set, during installation, the start/pause delay when the product is on/off (the respective delays can be set to 0, 45, 90 or 120 seconds and 6, 10, 15 or 21 minutes ).
HCS function: activation/deactivation of the exhaust fan is performed according to the ambient relative humidity values detected by the HCS (Humidity Control System) sensor integrated in the built-in electronic. The system works in two different modes, ensuring the best environmental conditions:
• Limit exceeded: the product starts working when the relative humidity of the environment exceeds a given limit, which can be set by the installer to four values: 60%, 70%, 80%, 90% RH (70% is the factory setting). The fan stops working when the RH level drops below 15% of the preset RH value or after two hours of continuous operation.
• Rapid increase in RH value: the product starts automatically as a result of a sudden RH increase ( [encoded_tag_closed] 20% in 10 minutes) and stops immediately to extract air when the RH level falls below 15% of the preset RH value or after two hours of continuous operation.>
• Possibility of connection with an external switch for manual control of the product, regardless of the HR value detected in the air (for example to prevent activation of the exhaust fan when the external humidity is too high).
TECHNICAL DATA AND PERFORMANCE DATA
Frequency (Hz)50
Insulation classII°
IP45
Maximum ambient temperature for continuous operation (°C)50
Maximum. absorbed Current at max. speed (A)0.14
Maximum. absorbed power at maximum speed (W)16
Nominal diameter (mm)80
Ø Discharge hole (mm)70
Voltage (V)220-240
Weight (Kg) 2.33
Maximum delivery at maximum speed (l/s)16.7
Maximum delivery at maximum speed (m³/h)60
Maximum pressure – maximum speed (mmH20)35
Maximum pressure – maximum speed (Pa)343
RPM max 1170
Sound power Lw [wpcodeself] – max speed45.5[dB(A)]
Ελληνικά
CE