VORT HRW 30 MONO EVO HCS

Decentralized heat recovery unit, for installation in residential and commercial areas of new buildings or those undergoing renovation for energy efficiency. Ideal as well to ensure proper air exchange, as well as to prevent excessive humidity in the room and mold growth on the walls.

• Anti-vibration and anti-UV plastic resin structure.
• Nominal diameter: 100 mm.
• Ceramic alternator with hexagonal cells. High heat exchange efficiency (up to 90% at minimum airflow).
• High performance EC motor fan. five operating speeds, to maximise performance when needed or to minimise noise and consumption.
• Built-in relative humidity sensor.
• One-way remote control that allows configuration or viewing useful product information. In detail:
  • to switch the machine on/off,
  • to select the operating mode (4 different options),
  • to adjust the fan speed,
  • to select the relative humidity threshold value that activates the Boost speed (three preset levels that can be set to 50%, 65% and 80%),
  • to activate the “Night mode”,
  • to display the status of the filter.
• Five different operating modes:
  • Continuous ventilation with heat recovery: the product cyclically extracts and introduces air to and from the room, recovering the energy stored in the exchanger.
  • Ventilation by exhaust air only: stale air is extracted from the environment.
  • Ventilation by air intake only: the product introduces fresh air into the environment.
  • Automatic ventilation: the heat recovery unit automatically manages air flows based on the readings of the relative humidity sensor.
  • Night ventilation: when the light falls in the room, the product automatically forces the fan to operate at minimum speed, regardless of the relative humidity values detected.
• Two air filters, one IsoCoarse 65% and one dust prefilter, both easily removable for washing.
• Mechanical quick closing system of the air supply integrated into the product frame.
• External rubber grill, which can be installed externally with plugs or internally, through the hole in the wall.
• Insect screen, which can be placed on the duct from the inside.