Flame retardant expanded polypropylene housing with zinc coated side plates.
Connection ports for ducts with a nominal diameter of 125 mm.
2 x EC brushless motor with shaft rotation in bearings. 3 speeds, which can be set independently at the time of installation and monitored by a wired remote control with LCD display.
Adjustable air flow between 85 m3/h and 185 m3/h.
Ultra high performance counter flow type heat exchanger made of molded plastic (PS).
100% by-pass, automatically operated by filtering.
Automatically activated system designed to prevent freezing of the heat exchanger.
Mod-Bus module with RS485 connection port in slave mode
Compatible with pilot mode from Vortice environmental sensors: temperature (C TEMP), relative humidity (C HCS), presence (C PIR) and smoke alarm (C SMOKE). With sensor-locked mode, local control functions are inhibited: the device continues to operate at minimum speed as long as the reference parameters monitored by the connected field sensors remain below the relevant threshold values. when these values are exceeded, the device will switch to the maximum speed setting, which is then maintained until normal ambient conditions are restored.
2 x F5 filter (alternatively, F7 filter option in output duct).
TECHNICAL DATA AND PERFORMANCE DATA
Filter class F5
Frequency (Hz) 50
Insulation class I° IP X2
Maximum absorbed current (A) 0.55
Maximum absorbed power (W) 71
Nominal diameter (mm) 125
Voltage (V) 230
Weight (Kg) 17.5
Sound breaking power LWA 56[dB(A)]
Sound pressure decay at 3 metres at maximum speed Lp 35[dB (A)]
Maximum airflow (l/s) 52
Maximum air flow (m³/h) 187
Max pressure (mmH2O) 23.7
Maximum pressure (Pa) 232
Maximum thermal efficiency (%) 94
Sound power at the exhaust inlet LWA 47[dB(A)]
Sound power at the LWA 44 power socket[dB(A)]
Sound pressure at 3m at maximum speed on the exhaust side Lp 26[dB (A)]
Sound pressure at 3m at maximum speed on the supply side Lp 23[dB (A)]
Ελληνικά
