Skip to content- Enclosures made of fire-resistant plastic resin, class E2, according to ISO EN 11925-2: 2010, in areas near engine and electrical components.
- Nominal diameter 250 mm.
- Induction motor, thermally protected, with shaft mounted on bearing supports, combined with centrifugal impeller.
- High water resistance: IPX5 (if installed in a duct).
- Adjustable speed via Vortice speed devices
- Absorbed power 1st gear (W)85
- Frequency (Hz)50
- Insulation classII°
- IP44
- Maximum ambient temperature for continuous operation (°C)60
- Maximum. absorbed Current at max. speed (A)0.50
- Maximum. absorbed Current in min. speed (A)0.40
- Maximum. absorbed power at maximum speed (W)110
- Voltage (V)220-240
- Weight (Kg) 5.9
- Delivery 1st gear (l/s)200
- Delivery 1st gear (m³/h)720
- Maximum delivery at maximum speed (l/s)275
- Maximum delivery at maximum speed (m³/h)990
- Pressure – 1st gear (mmH20)34
- Pressure – 1st gear (Pa)333.5
- Max pressure – max speed (mmH20)53
- Maximum pressure – maximum speed (Pa)519.9
- RPM max 2550
- min1850
- Sound pressure level Lp 3m – maximum speed56,2[dB (A)]
- Sound pressure level Lp 3m – min speed49,1[dB (A)]
Technical Data Sheet
DIMENSIONS
- Size A (mm)300
- Size B (mm)322
- Size C (mm)385
- Size D (mm) 247
- Size E (mm) 152.5
- Size F (mm)292
- Size G (mm)176.5
- Size H (mm) 140
- Size L (mm) 145
- Size M (mm)5.5
CERTIFICATES
CE UKCA
Curves